//
// >>>> TPFanControl˵ <<<<
//
// ֻܸĽ͵ĿҪмǣ
//
// -----------------------------------------------------------------
// CN:
// "Active=0" ȡBIOSá
// "Active=1" ݳÿơ
// "Active=2" "smart"ģʽģʽ
Active=2
BluetoothEDR=1 //set to 1 for bluetooth with enhanced data rate (i.e. T61,
//X61 for T4x, R5x set BluetoothEDR=0 )
NoWaitMessage=0 //set to 1 to avoid sleep message
// -----------------------------------------------------------------
// Windows Priority of Process (0-5, normal=2), increase if fancontrol has
// big delays in response while other processes consume performance.
ProcessPriority=2
// -----------------------------------------------------------------
// ʾͼ noballons = 1
// ʾͼ noballons = 0
NoBallons=0
// -----------------------------------------------------------------
// CN: ¶ÿX루Ĭ5
Cycle=5
// -----------------------------------------------------------------
// For Thinkpads A2x,T2x,X2x set NoExtSensor=1 to exclude reading
// of extended sensors to prevent program errors. Attention 570(E)
// is NOT compatible. Fan speed is not available on all models.
NoExtSensor=0
// -----------------------------------------------------------------
// CN: С
StartMinimized=1
// -----------------------------------------------------------------
// CN: Vistaͼ꣬ÿX루Ĭ1
IconCycle=1
// -----------------------------------------------------------------
// CN: ʾͼ¶/
ShowTempIcon=1
// -----------------------------------------------------------------
// ENGL: Save the icon by a start delay of the service of
// "SecStartDelay" (sec.) within "SecWinUptime" (sec.) after (re)boot
SecWinUptime=120
SecStartDelay=60
// -----------------------------------------------------------------
// CN: ¶ֵͼ꣬ƳȺɫ
// ֶֻ֧ܺģʽMinimizeToTray=1
IconLevels=52 55 60
// -----------------------------------------------------------------
// CN: 趨״̬仯ʱʾƵʺ̡
// һֵΪ0ʱֹʾ
FanBeep=0 0
// --------------------------------------------------------
// CN: ¼ֵýԶΪBIOSģʽС
MaxReadErrors=10
// --------------------------------------------------------
// CN: Log2File=1 , Log2File=0
// ¼־fancontrol.log
Log2File=0
// --------------------------------------------------------
// ENGL: Log2csv=1 enables, Log2csv=0 disables
// writing to TPFanControl_csv.txt renamed to
// TPFanControl_last_csv.txt after restart of TPFanControl
// rename to *.csv for use with excel
Log2csv=0
// --------------------------------------------------------
// CN: Զŷֿ¶ʱ
// 磺IgnoreSensors=pci,aps
IgnoreSensors=no5
// ---------------------------------------------------------
// ENGL: List of new 3 letter sensor names, delete leading
// slashes to aktivat. Don't use capital letters for readability
// of temp icon.
//SensorName1=cpu
//SensorName2=aps
//SensorName3=pcm
//SensorName4=gpu
//SensorName5=no5
//SensorName6=x7d
//SensorName7=bat
//SensorName8=x7f
//SensorName9=bus
//SensorName10=pci
//SensorName11=pwr
//SensorName12=xc3
// ---------------------------------------------------------
// ENGL: calculating Highest Temp with:
// temperature of sensor no. = real temp minus SensorOffsetno.
// Default SensorOffset1-12=0 , Capital O in SensorOffset,
// to activate delete slashes,
// Negative SensorOffsetno. values increase temperature values.
//SensorOffset1=20
//SensorOffset2=20
//SensorOffset3=0
//SensorOffset4=2
//SensorOffset5=1
//SensorOffset6=5
//SensorOffset7=5
//SensorOffset8=4
//SensorOffset9=3
//SensorOffset10=2
//SensorOffset11=1
//SensorOffset12=5
ShowBiasedTemps=1 // set to 1 to show calculated temps for sensors
// -----------------------------------------------------------------
// Show all/active sensors at start up. all=1 only active=0
ShowAll=0
// --------------------------------------------------------
// CN: 趨ͬ¶ʱķתٵȼ
// ¶2趨ֵ֮ʱִ¶趨ķת
// ġ¶ȣת١趨ɰԼҪ
// 1趨תٵȼһҪΪ0ʹõڸ趨¶ʱرշ
// תٵļ趨Ϊ64ܻ벻ĺ
// 趨תΪ128Ϊ˰ѷȿȨлBIOS mode(0x80)
// ӶرձѸ״´ȨøBIOS
// Celsius:
Level=50 0
Level=52 1
Level=55 3
Level=60 5
Level=65 7
Level=70 128